A Clean Ice Machine Means

                                 Clean Ice
and
                                  Happy Customers

 


          Buy the SlimeGUARD System to keep your ice machine clean    


The SlimeGUARD® System

Would you like to spend your time and money focusing on your customers instead of cleaning mold, mildew, algae, and fungus slime out of your ice machine?

We have the Solution for YOU!

What is The SlimeGUARD® System?

The SlimeGUARD® System consists of two parts:

The SlimeGUARD® Stick
1˝ x 9˝"

The SlimeGUARD® Spray

The Technology that makes The SlimeGUARD® System Work:

 

 

 


Magnification to
4-5 micros

NanoTitanium Dioxide is embedded within ceramic crystals in the SlimeGUARD® Sticks.  This acts as a photo catalyst or semiconductor that creates a strong oxidation reaction on the surface when contacted by an organic.  When organic compounds are attracted to it's surface they are removed by this oxidation power, leaving nothing behind.

This technology decomposes organic material and microorganisms, including spores, algae and fungus in air and water.

Chemical sanitation kills microorganisms, then leaves them in the water or on the hard surfaces. Unlike chemicals, NanoTitanium technology turns these organics into a gas that disappears.  This is a much cleaner, more appealing solution!

Our
NanoTitanium® Technology
 can turn this
into this in seconds!

What Makes Good Ice?

1-The purer the water is (meaning free of minerals and chemicals) the faster it freezes.
2-The purer the ice, the harder it is and the slower it melts - meaning less diluted, better tasting beverages.

The Ice Machine's Three Worst Enemies:

Sediment with Microorganisms
Scale
Chlorine

All of these cut efficiency and potentially cause machines to go down.  But it is not about the ice machines.  The most important thing is providing SAFE ice to your customers.

So...

The best solution for good ice and efficient ice machines is to use a quality water filter.

However...

Using a water filter to remove chlorine poses another problem.  Bacteria, Mold, Algae and Funguses can thrive in the environment in the sump of the ice machine!  This creates a cleaning problem for you and unsafe ice for your customers.

The ONLY Solution:  Use the SlimeGUARD® System

Used together, The SlimeGUARD® System kills mold, algae, fungus and bacteria on the hard surfaces of your ice machine and  in the water.

One SlimeGUARD® Stick works for up to 6 months, depending on the environment.  In normal conditions it lasts for 6 months.  In environments with large amounts of yeast (like a pizza parlor), the yeast is the perfect food for mold and algae and may reduce the life of the SlimeGUARD® Stick to 3-4 months.

One application of the SlimeGUARD® Spray works for 1-2 months, depending on the same conditions mentioned above.

The SlimeGUARD System is SAFE.  It does not contain any harmful ingredients and puts nothing into the water.  (CFR21 food acceptance material)  There is no affect on the taste of the ice except that it may be improved due to added cleanliness.

One SlimeGUARD® Stick works in machines producing up to 2,400 pounds of ice per day.

What does this mean for You?

Far Less Work
Far Fewer Maintenance Costs
SAFE, Clean Ice for Your Customers

The SlimeGUARD® System requires no tools, no mechanical installation, and only a couple of minutes of your time.

 

CleanIceMachine.info:   A Division of ezClearwater.com

© 2007-2008 ezClearwater.com   All rights reserved